The TM-7 is Gap Geo’s premiere receiver system for ground and airborne magnetic data logging. This advanced modern system is used in all our magnetics, SAM and SAMSON surveys, as well as environmental and explosive ordnance detection.
Starting with the TM-2, which dates back to the mid 1970s, and the TM-3 (1986), which was one of the first digital logging magnetometers, and then the TM-6 which was designed for the fast sampling requirements for the SAM technique, the TM-7 is the latest evolution developed by our in-house geophysical and engineering specialists. It represents GAP’s solution for maintaining the best cutting-edge proprietary receiver system for our customers as possible.
The TM-7 incorporates a fast sampling, highly accurate counter, which interfaces with commercially available magnetic field sensors. Importantly, the quantisation noise of the counter is an order of magnitude lower than that of available magnetometer sensors, enabling us to achieve very high signal to noise ratios through stacking, and so enabling the success of the SAMSON technique.
It has GPS navigation (using an internal L1 receiver or external DGPS), which directs the field crew as they walk (or fly) the system down the line. Data is logged to a flash card, and synchronised to GPS time, at micro-second accuracy.
The user interface is conveniently via a hand held, touch screen device. The software constantly logs timing and position information, and so the TM-7 can be used for either moving or stationary logging. It can be used with up to four sensors, for when extra local precision is desired (such as with explosive ordnance detection). The system can also log any serial data stream (two channels in the standard model).
The counter technology, and the achievable high sampling rates, enables a variety of filtering options to eliminate sources of noise and interference.
Many years of efficient, successful surveys have demonstrated it to be a robust complete solution for our clients’ exploration needs.
With four fix sampling rates, but also available is an alternative sampling mode where any speed between 1 to 4800 is selectable, with a wide range of filter options. Thereby, the system can be tailored to deal with specific interference problems.
Mag data range: 20, 000 – 100,000 nT (limited by the sensor)
|Number of Cs Vapour Sensors
||1 - 4
||Up to 9600
|Counter absolute error
||0.043 nT @ 50000 nT = 0.9ppm
|Larmor measurement range
||350 - 131000 nT (equivalent)
|Minimum detectable signal
||50 mV p-p
|Mag data range
||3000 - 110000 nT
||Rugged Handheld running WM5/6
|Data storage media
||Compact Flash card (Type II)
||Synchronised to GPS PPS
|Data time-stamp precision